Skull and Bones Wreath

From Joann fabrics instructions here

SUPPLIES & TOOLS:

• 2 3’ Tall Posable Skeletons
• Small Screw Driver
• Small Hack Saw or Craft Saw
• Medium Grit Sandpaper
• Strong Thick Quick Setting Adhesive
• 4” x 6” Slate Sign
• Chalk or Chalk Marker
• Spiders and Spider Webbing

DIRECTIONS:

Refer to photo for bone placement.
Follow manufacturer’s directions and allow adhesive to set up completely.

Use a small screw driver to take apart skeletons; leave one set of hands attached to forearm bones.

Use a small saw to cut off joint hinges and spine below rib cage.

Where necessary, sand edges smooth with sandpaper.

If desired, fill holes with thick adhesive.

Lay skull with rib cage on a flat surface; place bones around in a 14’ – 16” circle.

Beginning with the shoulders, carefully glue bones together.

Use chalk or permanent chalk marker to write desired words onto slate sign.

Firmly adhere sign to bottom portion of wreath.

Adhere hands and forearms as if holding sign.

Place spiders and webbing as desired.